All You Need to Know About Assessment Validation and Validating Assessments

All You Need to Know About Assessment Validation and Validating Assessments

Blog Article

Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.

We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.

Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.

The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.

According to the standards, two types of validation are necessary.

The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.

The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.

This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.

The Basics of the Two Types of Assessment Validation

What Does Assessment Validation Mean?

As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.

On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

This article will focus on assessment tool validation.

Steps to Perform Assessment Tool Validation

With a clear understanding of the two types of validation, let’s focus on assessment tool validation.

Optimal Timing for Assessment Tool Validation

Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Therefore, any time you obtain new learning resources, assessment tool validation should be completed before students use them.

There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.

Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:

- update your resources
- your new training products get added on scope
- when course is reviewed against training product updates
- learning resources are identified by you as a risk during your risk assessment

ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.

Training Products to Validate

Bear in mind, this validation aims to ensure compliance of all learning resources before use. All RTOs are required to validate all unit resources.

Getting Started with Assessment Tool Validation: Resources Needed

Educational Materials

Given that you are conducting assessment tool validation, you will need the full array of your learning resources:

Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.

Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.

Assessment Validation Panel

Clause 1.11 specifies the requirements for validation panel members. It states validation can be performed by one or more people. However, RTOs usually require all trainers and assessors to participate, sometimes including industry experts.

Your validation panel, as a group, must possess:

Relevant vocational competencies and industry skills for the unit being validated

Recent expertise and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or an updated successor

Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.

While ASQA does not have a recommended or required template for assessment tool validation, many templates are available online. These tools generally require validators to review the tools as a whole to see if they meet the principles of assessment.

Principles of Assessment Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While such templates facilitate validation, they often result in judgment errors because there’s insufficient space for comments on each assessment item.

It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Inspection?

As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.

Fundamental Principles of Assessment
Fairness – Does the assessment process provide equal opportunity and access to everyone?

Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?

Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Evidence Core Rules

Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool confirming that the work is the candidate’s own?

Currency – Are the assessment tools updated to reflect current units of competency and industry practices?

Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.

To prevent click here using learning resources that do not meet some unit requirements, make sure to follow these guidelines:

Be Consistent with Your Teachings

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

changing nappies

prepare bottles, bottle feed infants, and clean equipment

prepare solid foods and feed babies

respond appropriately to baby signs and cues

prepare and settle babies for sleep

monitor and encourage suitable physical exploration and gross motor skills for the age

Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.

Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.

All or No Competence

Observe the lists. As mentioned above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What types of information can be included in a work package?

The answer can include:

Compulsory resources

Associated expenses

Duration of activities

Specified roles and responsibilities

When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.

This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Possible answers include, but are not limited to:

Weather conditions – work area isolation, engineering, PPE

Work area and ground conditions – eliminating hazards, isolating, engineering controls

People – isolation, use of engineering controls, administration

Structural hazards – substituting, isolation, use of engineering controls

Chemical hazards – isolation, engineering, administration

Equipment or machinery – isolating, use of engineering controls, administrative controls

Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.